KVH Industries TracVision 6 User Manual download pdf (Page 37)

5. Repeat Step 4 for each of the following

transponder categories:

• vertical high • vertical low

• horizontal high • horizontal low

• right • left

TracVision 6 requires that the data fields for all

transponder categories be provided. If the selected

satellite does not have information for one or more of

the transponder categories, default information should

be entered in the fields as follows:

Transponder Data Default Value

Frequency 00000

Symbol Rate 27500

FEC Code the same value as provided for those

transponders with data

Network ID 0x0000

Polarity and Band whichever combinations are not

already provided

6. Type ZAP<cr> to restart the antenna.

7. If you need to configure a second user-defined

satellite, repeat this procedure starting with Step 1

to enter data for the USER2 satellite.

You have now added your user-defined satellite(s) to the

system’s satellite library.

If you want the antenna to track one or both of these user-defined

satellites, you will now need to install it. To install a satellite, use

the

SATINSTALL command, as described in ”Installing Your

Satellites” on page 36.

The next two pages provide examples of the user-defined satellite

configuration process.

Installation

54-0166

Table 2-10

Satellite Transponder

Default Data

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 87 88

No comments

KVH Industries TracVision 6 User Manual Page 37