KVH Industries TracVision R4 User Manual download pdf (Page 39)

3 Using Your

TracVision R5/R4

For TracVision R5/R4 to receive the satellite signals, the antenna

must have a clear line of sight to the satellite. If you only receive

intermittent signals or the antenna cannot find the satellite, check

around your vehicle for any objects that could be blocking the

signal, such as trees, buildings, highway overpasses, etc.

You must also be located within the selected satellite’s coverage

area in order to receive its signal. Refer to your satellite television

service manual to check the viable coverage area.

For your

convenience, KVH provides links to several web sites that offer satellite

coverage information. Simply go to our web site at: www

.kvh.com/

footprint.

3.1 Turning On the System

The TracVision R5/R4 system is easy to use. Antenna unit

initialization and satellite acquisition are completely automatic.

To use the TracVision R5/R4 system:

racVision R4 only)

Park your vehicle.

2. Turn on the receiver and television. (Refer to your

receiver user manual for complete operating

instructions for the receiver.)

3-1

Using Your TracVision R5/R4

54-0157 Re

o minimiz

e the time it tak

es the

antenna to acquire the satellite

, do

not change the channel during the

startup process or cable unwrap.

Figure 3-1

Be Aware of Objects that Might

Block the Satellite Signals

The TracVision R4 is for stationary

use only.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 64 65

No comments

KVH Industries TracVision R4 User Manual Page 39