KVH Industries TracVision S2 User Manual download pdf (Page 4)

A Guide to TracVision S2 – ADDENDUM

54-0196 Addendum to Rev. A

TracVision S2 Owner’s

Manual Addendum

(ECO #6040)

The following information applies to Revision A of the

TracVision S2 Owner’s Manual (KVH Part Number 54-0196).

2 Installation

Kitpack Contents

Two plugs have been added to the kitpack for sealing the predrilled holes

in the antenna baseplate.

Part Qty. KVH Part No.

Switchplate assembly 1 02-1236-01

Tie-wraps 5 22-0013

RJ11 handset cable 1 32-0724-25

Clam shell ventilator 1 19-0230

#6 x

⁄

4" thread-forming screws 5 14-0298-12

⁄4"-20 x

⁄8" hex screws 4 14-0250-10

⁄4" flat washers 4 14-0251

⁄

8" hole plugs 2 19-0282-06

2.2 Mounting the Antenna Unit

A step has been added to the antenna mounting

procedure. The hole plugs need to be installed before

mounting the antenna unit to the vehicle.

6. Set aside the antenna unit and clean the roof’s

surface to remove any debris.

6b. Seal the two baseplate holes shown in Figure 2-4

with the plugs provided in the kitpack.

Table 2-2

Kitpack Contents

Baseplate Holes

Figure 2-4

Antenna Baseplate (Bottom View)

1 2 3 4 5 6 7 8 9 ... 65 66

No comments

KVH Industries TracVision S2 User Manual Page 4