KVH Industries TracVision 4 User Manual download pdf (Page 69)

Set RF Tracking Parameters

Function: sets RF tracking parameter

Command: @SATCONFIG,X,N,F,S,C,ID,P,B,D<cr>

Response: Echoes the input data

Where: @SATCONFIG = directs data to the RF Board

X = satellite location A or B

N = satellite table # (98 & 99 are slots for user-

configured satellites)

F = frequency in MHz (either 00000 or a range from

10700 - 12700)

S = the satellite transponder symbol rate in

Mbit/second (01000 - 30000)

C = the FEC code (e.g., 12, 23, 34, 56, 67, 78)

ID = the satellite network ID in hexidecimal format

(0x####)

P = the LNB polarization (v=vertical, h=horizontal)

B = the LNB down conversion frequency (l=low,

h=high)

D = decoding type (0=test, 1=DSS-A, 2=DSS-B,

3=DVB)

ID Match/Decoded Network ID

Function: report ID match and decoded network ID

Command: @CHECKID

Response: Y,0X####

N,0X####

Where: Y = yes

N = no

0X#### = network ID

G.6 Installation Commands

Set/Report GPS Position

Function: reports or sets default GPS position

Command: GPS<cr>

GPS,XX,D,YYY,E

Response: GPS = XXD YYYE<cr>

GPS: XXD YYYE

Where: XX = latitude (0-90)

D = S (South) or N (North)

YYY = longitude (0-180)

E = E (East) or W (West)

G-6

A Guide to TracVision 4

Table G-6

Installation Commands

1 2 ... 64 65 66 67 68 69 70 71 72 73

Comments to this Manuals

No comments

KVH Industries TracVision 4 User Manual Page 69

Comments to this Manuals

Related products and manuals for Satellite antennas KVH Industries TracVision 4