KVH Industries TracVision 6 User Manual download pdf (Page 35)

Are the Satellites You Want to Track Listed in the Library?

If the satellites you want to track are listed in the library, skip to

“Installing Your Satellites” on page 36.

If you want to track a satellite that is not listed in the library,

follow the steps in the next section, “Programming User-defined

Satellites.”

Programming User-defined Satellites

The TracVision 6 satellite library has the capacity for two user-

defined satellites in case you want to track a satellite that is not

currently preprogrammed in the library. To configure a user-

defined satellite, information about the satellite must be

provided, including:

• Satellite name

• Satellite position (longitude)

• Transponder information for each of the following

polarizations/frequencies:

- vertical high & vertical low

- horizontal high & horizontal low

- right

- left

• Transponder information includes:

- frequency

- symbol rate

- FEC code, and

- network ID (in hexidecimal format)

• Decoder type

This information can be obtained from your satellite service

provider or from sites on the Internet, such as www.satcodx.com.

Installation

54-0166

How to tell the difference between

High and Low bands:

High: 11.700 - 12.750 GHz

Low: 10.700 - 11.700 GHz

For your reference, the satellite

configuration information for the

predefined satellites is available on

our web site at

www.kvh.com/

footprint

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 87 88

No comments

KVH Industries TracVision 6 User Manual Page 35