KVH Industries TracVision S3 User Manual download pdf (Page 32)

This information has to be entered for each of the following

transponder categories:

• vertical high • vertical low

• horizontal high • horizontal low

• right • left

TracVision L3/S3 requires that the data fields for all transponder

categories be provided. If the selected satellite does not have

information for one or more of the transponder categories,

default information should be entered in the fields as follows:

Transponder Data Default Value

Frequency 00000

Symbol Rate 27500

FEC Code the same value as provided for those

transponders with data

Network ID 0x0000

Polarity and Band whichever combinations are not

already provided

After entering this information, it is necessary to save these

settings. To do so, type:

@SAVE,A (or @SAVE,B if data is for User2 satellite)

@DEBUGOFF

After completing this process, restart the system by either cycling

power or typing

ZAP.

One of your user-defined satellite options has now been added to

the TracVision L3/S3 satellite library. This option will now be

available the next time the SATINSTALL command is given.

2-21

Installation

54-0157 Rev. G

Table 2-6

Default Transponder Values

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 76 77

No comments

KVH Industries TracVision S3 User Manual Page 32